|
Hi all,
I was bought one of these the other month by the in laws as a moving in present.
Am trying to plumb it in but the only location for it is 3 or 4 feet from the sink drain. The manual states NOT to extend the drainage hose.
Looking online is an absolute minefield of opinions, whilst my installation guide is sparse of info.
The general consensus is that you need to make a loop, or an air gap in the hose to prevent reverse siphoning or gasses/congestion from the sewer coming the other way (and to ensure the pump operates correctly?)
However, looking at my drains (which were re-done by the former owners) both my washing machine and sinks 2 inch pipes simply spill into what looks to be a 6 inch waste sewer which goes off and joins the one from my toilet at a later point.
There are warnings online about keeping 'surface water' and 'waste' pipes separate, I'd hate to think i'm contributing to any kind of pollution but from what I can see my gutters down pipes are embedded into the ground separately?
The only option I can think of (which falls in line with the installation guide) is to install a length of 2 inch piping - its then a case of whether I join to the existing sink waste or via its own exit?
Can anyone offer any advice on what I should be doing? Any plumbers offer a quick fix based on my circumstances?
Apologies for the waffle, but I thought I'd put everything I've encountered in the first post!
Thanks 
1/6/2010.a new era.we made it everyone!!!lets get the ball rolling for another 105 years of proud history.thank you cpfc2010.
palace forever.eeaaaaaaaaaaaaaggglless!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|