You are here: Home > Message Board > News & Politics > Texas murders
November 21 2026 11.03pm

This page is no longer updated, and is the old forum. For new topics visit the New HOL forum.

Texas murders


Page 4 of 5 < 1 2 3 4 5 >
Stirlingsays Flag 08 Nov 17 11.52pm

Originally posted by crystal balls

[Link]

Blame anything but the actual reason. The gun lobby have always been ludicrous, but now it's become a parody of itself!

Political news used for click bait is a problem.

A lot of liars making money out there.

Plato said that those who enter politics should be unpaid.....There's something in that.

As soon as advertisers started using the web.....well, money leads to corruption....it's difficult...I don't know what the answer is.

Edited by Stirlingsays (08 Nov 2017 11.54pm)

 


'Who are you and how did you get in here? I'm a locksmith. And, I'm a locksmith.' (Leslie Nielsen)

Ouzo Dan Flag Behind you 09 Nov 17 12.11am

Only a few more years until 3d printed guns become efficient killing machines.

It will be just like downloading an MP3.
Gun ownership in the uk is inevitable.

Edited by Ouzo Dan (09 Nov 2017 12.11am)

 


The mountains are calling & I must go.

jamiemartin721 Flag Reading 09 Nov 17 10.53am

Originally posted by Ouzo Dan

Only a few more years until 3d printed guns become efficient killing machines.

It will be just like downloading an MP3.
Gun ownership in the uk is inevitable.

Edited by Ouzo Dan (09 Nov 2017 12.11am)

This is unlikely - unless someone can invent a polymer that is effectively gun metal. The problem of 3D printed firearms is that the barrels and mechanism are only good for one shot, due to the degredation caused on the plastic by firing a round.

Plus of course you need bullets - which aren't exactly easy to come by in the UK. Even if you could download and assemble an assault rifle or handgun, that could sustain the pressures of gun fire, you'd still need to buy the bullets.

And other than shotgun shells, ammo is scarce in the UK other than 3-03 rifle rounds and .22 rounds for handguns and rifles (and even buying the available ammo requires a licence). Getting 5.56 or 7.62 or 9mm ammo is almost impossible except from illegal sources (the first two probably as close to impossible as it gets).

 


"One Nation Under God, has turned into One Nation Under the Influence of One Drug"
[Link]

Stirlingsays Flag 09 Nov 17 11.09am

3D printing is another one of those technologies with the potential for an amazing step forward in many ways.

Again....not so great for low skilled jobs by that's the way the cookie is crumbling for many jobs...both high and low skilled.

3D printers may not be able to build robust items now but surely that's just a matter of time.

To perhaps ensure that effective weapons aren't able to be downloaded and created.....perhaps we could keep 3D printers out of commercial availability and have people pick up their products at a local distribution centre.

But that takes away half of the whole point about 3D printers in the first place.

Still....the other option is having some kind of Chinese control of the Internet.....which is horrific to consider.

Anyone got other ideas how this technology could be made safe without destroying social freedoms?

 


'Who are you and how did you get in here? I'm a locksmith. And, I'm a locksmith.' (Leslie Nielsen)

hedgehog50 Flag Croydon 09 Nov 17 11.24am

Originally posted by Stirlingsays

3D printing is another one of those technologies with the potential for an amazing step forward in many ways.

Again....not so great for low skilled jobs by that's the way the cookie is crumbling for many jobs...both high and low skilled.

3D printers may not be able to build robust items now but surely that's just a matter of time.

To perhaps ensure that effective weapons aren't able to be downloaded and created.....perhaps we could keep 3D printers out of commercial availability and have people pick up their products at a local distribution centre.

But that takes away half of the whole point about 3D printers in the first place.

Still....the other option is having some kind of Chinese control of the Internet.....which is horrific to consider.

Anyone got other ideas how this technology could be made safe without destroying social freedoms?

3D nuclear bombs anyone?

 


We have now sunk to a depth at which the restatement of the obvious is the first duty of intelligent men. [Orwell]

Stirlingsays Flag 09 Nov 17 12.04pm

Originally posted by hedgehog50

3D nuclear bombs anyone?

How much?

 


'Who are you and how did you get in here? I'm a locksmith. And, I'm a locksmith.' (Leslie Nielsen)

jamiemartin721 Flag Reading 09 Nov 17 12.08pm

Originally posted by Stirlingsays

3D printing is another one of those technologies with the potential for an amazing step forward in many ways.

Again....not so great for low skilled jobs by that's the way the cookie is crumbling for many jobs...both high and low skilled.

3D printers may not be able to build robust items now but surely that's just a matter of time.

To perhaps ensure that effective weapons aren't able to be downloaded and created.....perhaps we could keep 3D printers out of commercial availability and have people pick up their products at a local distribution centre.

But that takes away half of the whole point about 3D printers in the first place.

Still....the other option is having some kind of Chinese control of the Internet.....which is horrific to consider.

Anyone got other ideas how this technology could be made safe without destroying social freedoms?

Notably though, even outside of 3-D printing, no one seems to make key gun parts like barrels and firing mechanisms out of plastic.

 


"One Nation Under God, has turned into One Nation Under the Influence of One Drug"
[Link]

hedgehog50 Flag Croydon 09 Nov 17 12.13pm

Originally posted by Stirlingsays

How much?

BOGOF!

 


We have now sunk to a depth at which the restatement of the obvious is the first duty of intelligent men. [Orwell]

Stirlingsays Flag 09 Nov 17 12.19pm

Originally posted by hedgehog50

BOGOF!

Well, I don't think I'm going to get a much better deal than that this side of black Friday!

 


'Who are you and how did you get in here? I'm a locksmith. And, I'm a locksmith.' (Leslie Nielsen)

Kermit8 Flag Hevon 09 Nov 17 12.19pm

Texan the long chewy sweet bar. Who remembers that? I could murder one now.

 


Big chest and massive boobs

[Link]


Jimenez Flag SELHURSTPARKCHESTER,DA BRONX 09 Nov 17 1.20pm

Originally posted by jamiemartin721

Notably though, even outside of 3-D printing, no one seems to make key gun parts like barrels and firing mechanisms out of plastic.

That is only a matter of time. There is a 3D Printers on Essex St (I think) where you can get an Action Man sized figure of your actual self if you so want, cost about 800 Bucks (500 odd Quid)There is talk of using them on International Space Station to make parts & I've seen body parts made where people have had accidents like lost a finger or had an ear ripped off. That's the way it will go..

 


Pro USA & Israel

elgrande Flag bedford 09 Nov 17 2.28pm

Originally posted by Jimenez

That is only a matter of time. There is a 3D Printers on Essex St (I think) where you can get an Action Man sized figure of your actual self if you so want, cost about 800 Bucks (500 odd Quid)There is talk of using them on International Space Station to make parts & I've seen body parts made where people have had accidents like lost a finger or had an ear ripped off. That's the way it will go..

Can they make me a bigger......

 


always a Norwood boy, where ever I live.

jamiemartin721 Flag Reading 09 Nov 17 2.36pm

Originally posted by Jimenez

That is only a matter of time. There is a 3D Printers on Essex St (I think) where you can get an Action Man sized figure of your actual self if you so want, cost about 800 Bucks (500 odd Quid)There is talk of using them on International Space Station to make parts & I've seen body parts made where people have had accidents like lost a finger or had an ear ripped off. That's the way it will go..

Problem is going to be finding a plastic polymer that's effective under the kind of stress a gun is put under when firing - 3D printer guns are basically one shot 'zip guns'. In terms of a matter of time, gun manufacturers haven't achieved that yet, so I'd hazard a guess that 3-D printer polymer that can do that is a way off.

Plus you still need the bullets. You can't print gunpowder (or bullets).

 


"One Nation Under God, has turned into One Nation Under the Influence of One Drug"
[Link]

Mr_Gristle Flag In the land of Whelk Eaters 09 Nov 17 5.51pm

Originally posted by Kermit8

Texan the long chewy sweet bar. Who remembers that? I could murder one now.

You bstard. I want one.

Those and the Assorted Toffo's.

 


Well I think Simon's head is large; always involved in espionage. (Name that tune)

Ouzo Dan Flag Behind you 10 Nov 17 10.32am

Originally posted by jamiemartin721

This is unlikely - unless someone can invent a polymer that is effectively gun metal. The problem of 3D printed firearms is that the barrels and mechanism are only good for one shot, due to the degredation caused on the plastic by firing a round.

Plus of course you need bullets - which aren't exactly easy to come by in the UK. Even if you could download and assemble an assault rifle or handgun, that could sustain the pressures of gun fire, you'd still need to buy the bullets.

And other than shotgun shells, ammo is scarce in the UK other than 3-03 rifle rounds and .22 rounds for handguns and rifles (and even buying the available ammo requires a licence). Getting 5.56 or 7.62 or 9mm ammo is almost impossible except from illegal sources (the first two probably as close to impossible as it gets).

Just give it time Jamie, there are websites that have all the cad files freely available to download, this includes 3d printed ammunition, all that's needed is gunpowder (potassium nitrate, charcoal & sulphur) actually just filter the glitter & crap out of fireworks & you have black powder.

I have no clue how you make smokeless gunpowder, I'm sure it wouldn't be hard to get the chemicals needed for it.

It's probably a bit dystopian on my part but give it 10 years and we will have fully printed assault rifles capable of over 600 rounds which you will be able to download and print in your own home with the only expense being the materials to build it.

I honestly think handguns will be made legal in the UK as a form of self defence as a counter to this and a few other things. it's inevitable.

Edited by Ouzo Dan (10 Nov 2017 10.37am)

 


The mountains are calling & I must go.

jamiemartin721 Flag Reading 10 Nov 17 11.50am

Originally posted by Ouzo Dan

Just give it time Jamie, there are websites that have all the cad files freely available to download, this includes 3d printed ammunition, all that's needed is gunpowder (potassium nitrate, charcoal & sulphur) actually just filter the glitter & crap out of fireworks & you have black powder.

I have no clue how you make smokeless gunpowder, I'm sure it wouldn't be hard to get the chemicals needed for it.

It's probably a bit dystopian on my part but give it 10 years and we will have fully printed assault rifles capable of over 600 rounds which you will be able to download and print in your own home with the only expense being the materials to build it.

I honestly think handguns will be made legal in the UK as a form of self defence as a counter to this and a few other things. it's inevitable.

Edited by Ouzo Dan (10 Nov 2017 10.37am)

Yeah but what you have there is a s**t gun probably good for one decent shot, a bullet that's massively unreliable, that's as likely to explode when you pull the trigger as to fire. A less reliable firearm than a musket or flint lock pistol, which you can legally buy and own anyhow (as they're antiques).

And if you have a magazine of 'gunpower' bullets, chances are a misfire it taking your hand off.

You can make a zip gun from elastic bands, a bullet, a piece of wood, a nail and a bit of metal tube - without having to own a 900 quid printer (and find instructions on line on how to do this). Hell for 900 quid, and a bit of effort of asking around you could probably buy an black market handgun with a magazine of ammo.

Maybe in 10 years, but I don't think that's the case - because guns manufacturers are more than 10 years ahead of 3-D printer tech, and they're not using cheap plastic parts but precision high stress tolerant metal alloys.

In theory you could make a shotgun out of two pieces of metal pipe, some elastic bands, nails and some wood. But you'd be the bravest man in the world to pull that trigger.

 


"One Nation Under God, has turned into One Nation Under the Influence of One Drug"
[Link]

Stirlingsays Flag 10 Nov 17 12.08pm

I went through my entire twenties with an assault rifle
in my boxer shorts.

I'm amazed I wasn't locked up.

More a paint gun now.

 


'Who are you and how did you get in here? I'm a locksmith. And, I'm a locksmith.' (Leslie Nielsen)

jamiemartin721 Flag Reading 10 Nov 17 12.11pm

Originally posted by Stirlingsays

I went through my entire twenties with an assault rifle
in my boxer shorts.

I'm amazed I wasn't locked up.

More a paint gun now.

You were only sporting a 5.56m I'm not surprised no one noticed you were assaulting them.

Me, I'm more of a 12ga - not so accurate, prone to accidental firing but with a decent spread, but mostly pump action....

 


"One Nation Under God, has turned into One Nation Under the Influence of One Drug"
[Link]

Stirlingsays Flag 10 Nov 17 12.14pm

Originally posted by jamiemartin721

You were only sporting a 5.56m I'm not surprised no one noticed you were assaulting them.

Me, I'm more of a 12ga - not so accurate, prone to accidental firing but with a decent spread, but mostly pump action....

 


'Who are you and how did you get in here? I'm a locksmith. And, I'm a locksmith.' (Leslie Nielsen)

Stirlingsays Flag 10 Nov 17 12.45pm

Originally posted by jamiemartin721

You were only sporting a 5.56m I'm not surprised no one noticed you were assaulting them.

Me, I'm more of a 12ga - not so accurate, prone to accidental firing but with a decent spread, but mostly pump action....

I have an impressive assault weapon, especially if you are measuring it in millimeters.

Maybe they did complain....I couldn't hear them over the sound of how fantastic I was.

Have you got a license for your weapon? It sounds like the authorities need to be aware of it!

Edited by Stirlingsays (10 Nov 2017 12.57pm)

 


'Who are you and how did you get in here? I'm a locksmith. And, I'm a locksmith.' (Leslie Nielsen)

Page 4 of 5 < 1 2 3 4 5 >

You are here: Home > Message Board > News & Politics > Texas murders